Specials
Heavy Duty Submersible Pump - See below
-- and --
Electric Drum Pump -
save
over 25% by mention of this special
The EP Series drum pump is designed to handle the majority of all drum pump applications. It is light in weight at only 5 pounds and able to be used to pump low viscosity liquids at flow rates up to 6 GPM. This would empty a 55 gallon drum in less that 10 minutes.
The pump is constructed of polypropylene material and uses a graphite filled Teflon bushing. The shaft of the pump is stainless steel or optional High nickel alloy for solutions that would attack stainless steel. The standard motor is 1/7 HP and supplied with a 9 foot 120V plug. The motor incorporates a handle and an on-off switch. CSA approved.
For 55 gallon drums - use 40" length
tube
For carboys - use 27" length tube
| 40" pump with stainless steel shaft | $ 374.00 normal - $ 280.00 special |
| 40" pump with nickel alloy shaft | $ 409.00 normal - $ 306.00 special |
| 27" pump with stainless steel shaft | $ 374.00 normal - $ 280.00 special |
| 27" pump with nickel alloy shaft | $ 330.00 normal - $ 247.00 special |
| Shipment from stock - add $ 10 per unit for UPS ground shipment within US. | |
| NOT FOR FLAMMABLES | Special expires on 7-1-2008 |
| Pump performance: Up to 6 GPM 10 foot maximum head 27" or 40" Tube Lengths 1" tube diameter for carboys Light weight: 5- 6 lbs. Maximum Temperature: 120 F Maximum Specific Gravity: 1.40 Maximum Viscosity: 150 cSt |
Motor specifications: 1/7 HP (120V) 9 foot cord with plug Molded handle with on-off switch 10,000 RPM 120VAC 50/60 Hz - CSA Certification - or - 220-240VAC 50/60 Hz - CE Certificate |
Order must state "Internet Special" for savings.
Additional details of pump and other drum pump for heavy duty service - details
BJM J400 - 115V - 1/2 HP
cast iron submersible pump -
Special Price Expires 12-31-06 : $ 360.00 - Regular Price $ 440
This
is an industrial quality submersible pump suitable for waste water
applications. Featuring a stainless steel shaft and motor housing and
double mechanical seals (silicon carbide on the lower pump side) in a separate
oil filled chamber. The J400 is supplied with a 33 foot power cord with a
115VAC plug. The large 2" discharge provide flow rates up to 50 GPM
at 15 feet yet is portable at only 30 pounds.
Order must state "Internet Special" for savings.
For automatic operation, a float switch may be added.
The J Series is available in sizes to 10 HP and also all stainless steel construction. Details of the J Series