Electric Drum Pump -
save
over 25% by mention of this special
The EP Series drum pump is designed to handle the majority of all drum pump applications. It is light in weight at only 5 pounds and able to be used to pump low viscosity liquids at flow rates up to 6 GPM. This would empty a 55 gallon drum in less that 10 minutes.
The pump is constructed of polypropylene material and uses a graphite filled Teflon bushing. The shaft of the pump is stainless steel or optional High nickel alloy for solutions that would attack stainless steel. The standard motor is 1/7 HP and supplied with a 9 foot 120V plug. The motor incorporates a handle and an on-off switch. CSA approved.
For 55 gallon drums - use 40" length
tube
For carboys - use 27" length tube
| 40" pump with stainless steel shaft | $ 381.00 normal - $ 285.00 special |
| 40" pump with nickel alloy shaft | $ 426.00 normal - $ 318.00 special |
| 27" pump with stainless steel shaft | $ 344.00 normal - $ 255.00 special |
| 27" pump with nickel alloy shaft | $ 390.00 normal - $ 290.00 special |
| Shipment from stock - add $ 10 per unit for UPS ground shipment within US. | |
| NOT FOR FLAMMABLES | Special expires on December 31, 2009 |
| Pump performance: Up to 6 GPM 10 foot maximum head 27" or 40" Tube Lengths 1" tube diameter for carboys Light weight: 5- 6 lbs. Maximum Temperature: 120 F Maximum Specific Gravity: 1.40 Maximum Viscosity: 150 cSt |
Motor specifications: 1/7 HP (120V) 9 foot cord with plug Molded handle with on-off switch 10,000 RPM 120VAC 50/60 Hz - CSA Certification - or - 220-240VAC 50/60 Hz - CE Certificate |
Order must state "Internet Special" for savings.
Additional details of pump and other drum pump for heavy duty service - details