S
Series submersible pumps are designed for municipal, industrial and agricultural
wastewater liquids with solids utilizing single vane or shredder
action impellers. The S and SK
models offer high quality and performance for a very modest investment.
Motor casing, impeller shaft and all hardware are made of 304 S.S., with other exposed parts made of cast-iron. The S-pumps have non-clog, open vane impellers designed for high volume and lift performance. All pump feature double mechanical seals (lower; Silicon Carbide) which work in a separate oil chamber. This assures longer life, less maintenance, and less down time.
All S-pumps have built in overload protection against overheating and low or high amperage. Each pump is tested at the factory for performance and safety.
|
S-SERIES Single Vane Impeller - The S-pumps have non-clog, single vane impellers designed for high volume and lift performance. Motor casing, impeller shaft and all hardware are made of 304 S.S., with other exposed parts made of cast-iron. All pumps feature double mechanical seals (lower; Silicon Carbide) which work in a separate oil chamber. SX-SS is also available in all 316SS. Brochure Specifications for S Series Performance Curves Engineering Data:
|
S Series |
|
SK-SERIES Shredder Pumps - Designed to reduce the size of solids while pumping. Ideal for Schools, Trailer Parks, Shopping Centers, or other high abuse areas. This pump shreds plastic or aluminum soda cans, socks, shirts, pop tops and most other items that would clog a standard sewage ejector. If you maintain a sewage ejector in a public location you know the problem that this pump can solve. The Shredder (SK) type pumps leave solids slightly larger than if passed through a grinder pump. The shredding action is caused by using a cutting type impeller with a Tungsten Carbide Tip, against a "spiral" shaped diffuser plate. All SKX-SS models are also available in all 316 cast stainless steel. Motor casing, impeller shaft and hardware are made of 304 S.S., with other exposed parts made of cast-iron. All pumps feature double mechanical seals (lower; Silicon Carbide) which work in a separate oil chamber. All SK-pumps have built in overload protection against overheating and low or high amperage. Brochure Specifications for SK Series Performance Curves Engineering Data:
|
SK Series |
SV SERIES - Vortex Impeller Pumps - Designed to pump solid in a size just under the pump discharge size.
The SV-pumps are equipped with Vortex type impellers, undoubtedly the best non-clog impellers ever invented for the handling of mud, raw sewage, viscous liquids rags, wood chips and other solids. They pass up to 90% of pump outlet diameter.
Superior motor protection for longer life, less maintenance and less downtime. To protect the motor all pumps feature double mechanical seals, which work in separate oil, chamber. In addition, an oil-seal ring has been installed under the oil chamber to prevent silt and sand to enter the chamber in the first place.
All pumps are equipped with thermal overload protection against over-heating. Each pump is tested at factory, both for performance as well as for safety. Level control and level control systems are available.
Brochure Specifications for SV Series Performance Curve
