GF 32-9 - IGF 32-9  - TIGF 32-9

Super tough, Space-age material, 13.5 Lbs. Lightweight, Corrosion resistant

Ideal for light construction dewatering or pumping everything from contaminated dirty water to corrosive liquids.  This pump is used in the following   industries; Metal Plating, Salt mining, Plumbing, Marine, Agriculture, Chemical, Rental, Construction and by Utilities and Fire Departments.

The Perfecta pump for safeguarding vaults, dewatering construction sites, emptying tanks or pumping out ponds.   The unique dual port allows for a top or side discharge design virtually eliminates kinks in your hose; use vertical port for deep/narrow places or use the horizontal port for shallow/wide applications.

• Virtually unbreakable
• Compact and lightweight. Only 13.5 lbs.
• Never rust. Excellent resistance against acids, alkalies.*
• Thermal breaker incorporated in motor windings shuts off power before over heating due to locked rotor or long periods of running dry (130° C).

• On/Off mercury switch is easily adjusted to provide level control and to eliminate unnecessary running.
• Two discharge ports: 1 ¼" inside threaded connection and one 1 ½" tapered hose connection delivered with each pump.
• For permanent installation temp not to exceed 145° F.
• For intermittent use submerge less than 20 minutes in 195° F Max.

Optional

• 1 ½" male firethread outlet.
• Pump available without level control.
• 1 ½" NPT connection

GF32-9 and GF32-9NL

• Pump Material: Noryl® GTX 830, 304 S.S. Rotor shafts and 316 S.S. Hardware
• Seal System: 2 seals (1 Viton®, 1 Buna)
• Motor Voltage: 115 V, 60 Hz, single-phase std.
• Max. Power Consumption: 500 Watt
• Max. Submersion Depth: 33’ (10m) or limited to length of cable
• Overall Dimensions: 7.2" (185mm)
• Height Including Handle: 9.8" (250mm)
• Weight: 13.5 lbs. (6.2kgs)
• Power Cord: 22’ submersible
• Level Regulator: Automatic on/off level control std - add NL for No Level controller
• Oilfilled Motor: Shell Tellus C68 or equal
• Motor Protection: Thermal breaker; Capacitor
• GF-32-9 data       GF32-9NL data

Performance Curve

Click Here

• Pump Material: Noryl® GTX 830, 316 S.S. Shaft & Hardware
• Seal System: 2 Viton® seals
• All other components are the same as for GF32-9. Please see above
• IGF-32-9 data       IGF32-9NL data

Pump Material: Noryl® GTX 830, titanium shaft

• Seal System: 2 Viton® seals
• Hardware: Titanium coated 316 S.
• Cord: 15’ EPDM
• TIGF-32-9-NL Data 

* Not for use in flammable liquids!

Consult chemical resistance chart for compatibility between pump materials and liquid before operating pump.  Or better yet, contact KTH Sales with your application.  We have over ten years of experience with this pump in some very nasty applications -- we will be able to advise you through our experience -- our customer's feedback has been very important regarding the use of this pump.

BJM has other submersible pumps in cast iron and stainless steel with motor horsepower from 0.2 to 10 HP. 

Perfecta Submersible Pump Brochure	Perfecta Performance Curve
Perfecta Submersible Owner's Manual	Perfecta dimension drawing

 

Click Here for Metal Pumps to 10 HP

Click Here for Metal Pumps to 21 HP