 Submersible
Sump Pumps -
Cast Iron or Stainless Steel For dewatering - R, J and KB Series For sewage and trash - S Series For grinding solids - G Series For slurries and abrasives - KZ and PGV Series
BJM Metal Sump Pumps - Offering submersible
pumps for waste transfer pumping applications with motor horsepower from .15 to
30 HP. Submersible pumps are designed for pumping SJOW (Neoprene) cord as standard. EPDM cord is available as an option (about $ 5.00 a foot price adder.) Pumps must not be used for pumping flammables.
Stainless Steel Pumps Brochure
R400D - Mop Pump constructed as above with special foot to allow pumping within 1/12" of an inch. 1/2HP RX Series - Slim-Line Top Discharge - Cast iron impeller and pump housing with outer pump casing, motor casing, pump shaft and motor housing of 304SS. 1 or 2 HP RX-SS - Slim-Line Top Discharge - All components in contact with liquid are 316SS. 1 or 2 HP
J-H - High Head - For waste water removal - Motor casing, hardware and impeller shaft are 304SS with all other parts constructed of durable cast iron. 1HP to 10 HP JX-SS - Side Discharge - All components in contact with liquid are 316SS. 1/2 HP to 10 HP
SX-SS - Sewage and Trash Pump - All components in contact with liquid are 316SS. Impeller is single vane for handling solids. 1 HP to 10 HP SV Series - Sewage and Trash Pump with Vortex Impeller - Cast iron impeller and pump housing with outer pump casing, motor casing, pump shaft and motor housing of 304SS. Vortex impeller for passing maximum solid sizes. 1 HP to 10 HP SK Series - Shredder Pump - Cast iron impeller and pump housing with outer pump casing, motor casing, pump shaft and motor housing of 304SS. Shredder will cut solids down in size to allow pumping. 1 HP to 10 HP SKX-SS - Shredder Pump - All components in contact with liquid are 316SS. Shredder will cut solids down in size to allow pumping. 1 HP to 10 HP G Series - Grinder Pump - Cast iron impeller and pump housing with outer pump casing, motor casing, pump shaft and motor housing of 304SS. Impeller and grinding wheel are super-hardened high chromium cast iron construction. Designed for grinding of vegetable matter, thin pieces of plastic or cloth-like material. Used when pumping on long pipe runs or when using small diameter piping. 1 1/2 HP to 5 HP
A great solution for dewatering settling basins, retention ponds, wash sumps or any pump job with tough silt, sand or coal fines. The KB-Series offer top discharge performance and excellent quality for a very modest investment.
Features agitator to stir up sand, solids and slurries to prevent the pump from clogging. Hard chromium impeller and agitator. 5 to 30 HP. Sil-carbide double mechanical seals in oil filled motor chamber.
For large solids and tough slurries. The recessed impeller design is self-venting and provides a good choice for temporary open pit pumping. 7.5 to 30 HP provides flows to 900 GPM
|
water with a small amount of solids or a large amount of solids.
The solids can be passed through the pump or in some designs, the solids are reduced in
size or ground up similar to a garbage disposal. For non-corrosive service, cast
iron or hardened cast iron alloy, is usually best from a cost and wear resistance
standpoint. For mild corrosive service, 304 or 316 stainless steel can be offered
for many of the models. For tight spaces, a slim-line top discharge offers a smaller
overall diameter. It is recommend that GFI be used for all pumps used in a
portable application. Most pumps are supplied with a 
- Most pumps are now available with high temperature motors
for applications up to 190F - 
R Series - Slim-Line Top Discharge
- for dewatering and general
purpose - Outer pump casing of FRP with cast iron impellers and 304SS motor
housings. 0.15 HP - 2 HP
J Series - Side Discharge - For waste water removal -
Motor casing, hardware and impeller shaft are 304SS with all other parts constructed of
durable cast iron. 0.2 HP to 10 HP
S Series - Sewage and Trash Pump - Cast iron impeller
and pump housing with outer pump casing, motor casing, pump shaft and motor housing of
304SS. Impeller is single vane for handling solids. 1 HP to 10 HP
KZN Series - Heavy Duty for Sand / Sludge / Slurry
Service - 
PGV
Series - Horizontal Submersible with Recessed Vortex Impeller
- Thermoplastic Perfecta submersible pumps
Perfecta
- Submersible Sump Pumps - Plastic Construction - .4 HP
Super tough, Space-age material, 13.5 Lbs. Lightweight, Corrosion resistant
Ideal for light construction dewatering or pumping everything from contaminated dirty water to corrosive liquids. This pump is used in the following industries; Metal Plating, Salt mining, Plumbing, Marine, Agriculture, Chemical, Rental, Construction and by Utilities and Fire Departments.
The Perfecta pump for safeguarding vaults, dewatering construction sites, emptying tanks or pumping out ponds. The unique dual port allows for a top or side discharge design virtually eliminates kinks in your hose; use vertical port for deep/narrow places or use the horizontal port for shallow/wide applications.
Perfecta Plastic Submersible Pump for corrosive chemicals.
|
Product Submittals / Engineering Data for BJM Pumps
|
|||
Liquid
Level Controls