Banjo Tank Fittings
KTH Sales, Inc. 
TF Series bulkhead fittings in
black polypropylene or 316SS
TF Series bulkhead fittings use a exterior nut to
compress the gasket against the inside of the tank wall. These
bulkheads are threaded on both the outside and the inside. Standard
with EPDM gaskets with an option of Viton.
BF
Series Bolted Bulkhead Fittings in black polypropylene
BF Series use four bolts for the compression - the
bolt heads are are capped and electronically sealed to prevent interior contact with the
liquid. Bolted bulkhead fitting are recommended when additional
strength is required for gasket sealing or piping stress is of
concern. EPDM gaskets are standard with Viton as an
option.
See "Bottom Drain" fittings when complete drainage is required. |