Three Way Ball Valve
All three ports are supplied with union connections
1/2" - 2"
PVC valves are supplied with EPDM or Viton O-rings and Teflon seats
CPVC valves are supplied with Viton O-rings and Teflon seats
MULTI-PORT VALVE
SPECIFICATIONS
All thermoplastic multi-port valves (¼" through 2") shall be produced
of PVC type I, cell classification 12454-B or CPVC Type IV, cell classification
23447-B. Valve o-rings shall be made of EPDM or Viton material. Valve seats
shall be Teflon material. Valves shall be operated by a handle or pneumatically
or electrically by an actuator. Valves shall be capable of being field retrofit
with a pneumatic or electric actuator. Valves shall be full port (equal to or
greater than the minimum inside diameter of sch 80 pipe). Valves shall have
three union nuts for ease of disassembly. End connectors shall be of socket,
threaded or flange type. Valves shall meet. or exceed the European DIN 3441
standard for pressure rating. Valves shall be capable of being adjusted
externally for seat wear.