KTH Sales presents:  Finish Thompson

Drum Pumps - EF, PF, TT, HVDP, TM mixer 

Polypropylene, PVDF or Stainless Steel

PF Series Drum Pumps are designed for long service life with the abilities to meet the most demanding applications.  The sealless design incorporates a double suction impeller that produces up to 40 GPM transfer rates. The pump tubes are furnished in a 40" length for 55 gallon drums as well as 27",  48", 60" and 72" lengths.  Polypro tube is also available in 15" length.

Ask about the new variable speed / voluble flow option.

Pump Tubes

PF-P polypropylene

• For corrosive liquids up to 500 cps
• Maximum Sp. Gr. 1.8
• Up to 40 GPM transfer
• Up to 80 foot pressure (at low flow)
• Up to 160 F

Material in solution

• polypropylene - tube and impeller
• Teflon® - bushings
• Viton® - O-rings
• Inconel - shaft

Recommended for diesel exhaust fluid (DEF)  - DEF Kits bulletin 

PF-V PVDF

• For very corrosive liquids up to 500 cps
  (concentrated sulfuric, HF, nitric)
• Maximum Sp. Gr. 1.8
• Up to 40 GPM transfer
• Up to 80 foot pressure (at low flow)
• Up to 120 F

Material in solution

• PVDF - tube and impeller
• Teflon® - bushings
• Viton® - O-rings
• Inconel - shaft

bulletin for PF Series

• For corrosive liquids up to 500 cps
• Maximum Sp. Gr. 1.8
• Up to 40 GPM transfer
• Up to 80 foot pressure (at low flow)
• Up to 220 F

Material in solution

• 316 - tube and shaft
• Teflon® - bushings
• Viton® - O-rings
• Halar® - impeller

For pumping flammables, use only M3X,  M5X or M6X motor and static protection kit # A100835

M3V - The new variable speed 1/2 HP - 115V motor is Drip Proof enclosure for most applications environments - The case is a molded plastic and incorporates a handle and rocker switch.  A thermal overload reset switch and 12' cord and plug are included. Use M5V for 230V.  Both feature new quick disconnect drive between the tube and motor. 
M3 - The standard 1/2 HP - 115V motor is Drip Proof enclosure for most applications environments - The case is a molded plastic and incorporates a handle and rocker switch.  A thermal overload reset switch and 12' cord and plug are included. Use M5 for 230V.
M3T - This 1/2 HP 115V motor is TEFC enclosure for more corrosive environments - The case is a molded plastic and incorporates a handle and rocker switch.  A thermal overload reset switch and 12' cord and plug are included. Use M5T for 230V.
M3X - This 1/10 HP 115V motor is Explosion Proof - Class I, Div. I, Group D - reduced flow applications.  Use M5X for 230V.
M6 - Air motor for pumping in non explosive environments
M6X - Air motor for pumping in explosion proof environments
M10X - Electric motor for explosion proof environments but not flammable liquids - 230V - full flow applications
Accessories
Drum Adapter - 2" for mounting in bung hole of drum - polypropylene - 316 SS - galvanized steel
Strainer - For suction of pump to prevent debris from entering pump - polypropylene
Dispensing Nozzle - Combination of polypropylene and 316SS
Wall Mounting Bracket - Hold pumps upright - epoxy coated steel
Static Protection Kit - For use when pumps flammable liquids
bulletin for PF Series

bulletin for EF Series

• Pump performance:  Up to 12 GPM with 5 foot lift
• 18 foot maximum head
• 16" & 27" length for carboys
• 40" & 48" Tube Lengths for drums/totes
• 1 1/4" tube diameter - bung adapters for 2" are optional
• Light weight:  9 lbs.
• Maximum Specific Gravity: 1.20
• Maximum Viscosity: 300 cSt
• Maximum Temperature:  150 F EFP, 160F EFVF, 212F EFS

• Electric motor specifications:  1/3 HP 
• 9 foot cord with plug
• Molded handle with on-off switch
• Two speed motor -  selectable
• 115 VAC 60 Hz - CSA Certification - or -
  115 VAC or 230VAC 50/60 Hz - CE Certificate
• NOT FOR FLAMMABLES

• Air motor S4  -  1/2 HP air motor 
• 300 - 11,000 RPM - Flow up to 6 GPM
• May be used for solvents when using stainless steel tube and static protection kit

Optional accessories:  3/4" discharge hose, drum bung adapter, control nozzle.

The above pump replaces the EP, BP and TBC Series drum pumps.