|
MX Series Magnetic Drive Pump A redesign of the MDH Series Polypropylene or ETFE polymer |
|
|
The MX Series pump represent the latest state-of-the-art design in plastic magnetic drive pumps. With the experience gained from previous generations of pumps, the MX Series has been designed to meet the most severe operating conditions. When fitted with a carbon bearing, the MX will allow for brief periods of dry running. The new "self-radiating structure" (patent pending), in addition to the existing proven non-contact principle and front and rear supported spindle, greatly improves the ability to withstand some cavitation and running against a closed discharge valve. MX Series pumps are highly recommended for use in various production processes such as filtering, spraying, washing and etching in surface treatment processes. |
 |
|
Split Volute casing (international patent pending) – The MX Series is the first resin magnet pump that uses a split pump casing divided into two, front casing and the rear casing, to form a vortex chamber. The volute limits the liquid getting out of the impeller and returns it to the pump casing which is efficiently guided to the discharge port to enhance overall efficiency. Self-radiating structure (international patent pending) – Through heat dispersion holes provided in fixed portions of the impeller and the magnet capsule, the liquid around the spindle and bearing is forced to circulate so that heat generated by sliding can be reduced effectively, thus preventing melting and thermal deformation.
|
 |
| Three different casing
sizes 1" x 1", 1 1/2" x 1 1/2" or 2" x 1 1/2" Fractional horsepower to 3 HP - flows to 130 GPM
|
|
