Inline Strainer

These versatile inline strainers provide high surface area straining and large capacity without taking valuable plant floor.  The inline connection allows for retrofit in existing pipelines. The three bolt closure top provides for a quick service of the internal stainless steel basket.  The basket is held with an Omega spring and sealed with a o-ring seal.  Strainer mesh sizes are nearly unlimited.  Surface area of 75 to 635 square inches.

Features
  • Carbon steel,  304 or 316 SS  construction
  • Connection size 3/4" to 4" - NPT or ANSI flanged
  • Flow rates to to 1000 GPM
  • Surface area of 75 to 635 square inches
  • High dirt load capacity• 3-bolt swing lid with eye nuts
  • High capacity basket with positive hold down spring
  • Vent, drain and gauge ports
  • Each vessel is factory hydro-tested
  • Two-part epoxy finish on carbon steel
  • Buna-N® lid and basket o-rings - other materials available

Options

  • Higher PSI pressure ratings
  • Filtration from 2 to 2000 microns
  • ASME Code U or UM
  • Mesh-lined strainer baskets

 

Bulletin for Inline Strainer 

Also consider vertical mounted strainers that will accept micron rated filter bags

Single Basket Chambers L44-L66-L88 Single Clamp Band Chamber Top Entry Eye-Bolt Chamber
Multi-rounds for flow rates to 4300 GPM Manifold Systems - Manual & automatic Single OEM Chamber
See Tech Sheet for additional sizing information. Back to Krystil Klear Index Back to Filtration Main Index