Krystil Klear Liquid Filter Housings

Liquid Bag Filter Housings:

The Krystil Klear Liquid Bag series are engineered to effectively remove dirt, pipe scale and other contaminants from process liquids such as water, chemical and petroleum products. Quality construction and design assure protection for all down-stream equipment.

KK-cut-a-way.jpg (123137 bytes)

HOUSING OPERATION

Unfiltered liquid enters the housing above the filter bag or strainer basket; flows down into the housing; and continues through the element. Solids are trapped inside the filter bag or strainer and easily removed when the housing is serviced. The housing design provides a large sump area at the bottom of the basket for particulate accumulation.

Effectively removes dirt, pipe scale, and other contaminants from process liquids such as water, chemical and petroleum products. May be used as a strainer before a pump or as a filter after the pump.

KK-66FILTER.jpg (70569 bytes) Model 44 - Model 66 - Model 88

Flow rates to 220 GPM

Features

  • Carbon and stainless steel construction
  • 100 to 500 PSI pressure rating
  • Low pressure drop
  • Quick swing lid with eye nuts
  • O-ring seals – lid and basket
  • Differential, drains and vent ports
  • Adjustable support legs
  • Basket
  • Heavy duty 316 stainless steel
  • Basket seal ring

Options

  • Duplexing – manual and automatic actuation
  • Diversa-Flow manifold systems
  • Portable cart with air operated diaphragm pump
  • Dual stage straining / filtering
  • Higher pressure rating
  • Basket
    • Mesh strainer
    • 325 x 2300 through 20 mesh
  • Liquid filter bags

VESSEL CONSTRUCTION:

Krystil Klear vessels are designed for operating from 100 to 500 PSI at 300o F. The housing design provides a large sump area at the bottom of the basket for dirt and scale accumulation. This design uses the filter more efficiently and prolongs the element life.

The basket(s) seal onto an o-ring to eliminate particulate bypass between the basket and seat.

A vent and a gauge port in the housing lid and a drain port in the housing speed evacuation and filling.

Permanently piped housings are opened with simple tools without disturbing the piping.

Swing bolts with eye-nuts allow easy opening and closing of swing lid. No need to remove any hardware.

As a standard finish, all vessels are blast cleaned and painted inside and out with a 2part epoxy. Stainless steel vessels are supplied with a satin finish.

Details for filter baskets

Liquid Filter Bags:

Designed to protect both equipment and processes in water, chemical and petroleum product applications. See Liquid Filter Bag for element characteristics.

Multi-rounds for flow rates to 3500 GPM Manifold Systems - Manual & automatic
Technical Sizing Information Strainers and Filter bags
Back to Filtration Main Index Back to Krystil Klear Index

Bag filter housings constructed of CPVC and PVDF