Krystil Klear Multi-rounds for flow rates to 4300 GPM

Multi-Round Liquid Bag Housing / Strainer 

Krystil Klear's Multi-Round Series of Liquid Bag Housings range from a 2 basket to 21 basket housing design depending upon the needed surface area and volume of fluid to be filtered or strained.

Multi-round vessels effectively remove dirt, pipe scale, and other contaminants from process liquids such as water, chemical and petroleum products. Quality construction and design assure protection for all downstream equipment.  Units can be duplexed to allow for cleaning while maintaining high flow rates.  Duplex Units link.

FEATURES Flow rates to 4300 GPM Straining surface area to 90 sq. ft. Carbon, 304,or 316 stainless steel material 1" NPT drain, ¼" gauge, (2) ½" vent connections 150 PSI pressure rating Low pressure drop Davit cover lift closure with swing bolts Buna seals - lid & basket Differential, drain, and vent ports Heavy-duty support legs 316 stainless steel strainer baskets 2-part epoxy finish on carbon vessels All units are bottom inlet and outlet

VESSEL CONSTRUCTION:

Multi-round vessels are designed for operating up to 150 PSI at 300^oF. The housing design provides a large sump area at the bottom of the basket for particulate accumulation. This design utilizes the filter more efficiently and prolongs the element life.

The 316 SS baskets seal onto a Buna o-ring to eliminate particulate bypass between the basket and seat. Optional mesh-lined strainer baskets and o-rings are available.

A vent in the housing lid and a drain port in the housing speed evacuation and filling. Gauge ports are located on the lid and body of the housing to install gauges for monitoring the differential pressure across the bag. Permanently piped housings are opened with simple tools without disturbing the piping. Swing bolts with eye-nuts allow easy opening and closing of swing-lid. No need to remove any hardware.

As a standard finish, all vessels are blast cleaned and painted inside and out with a 2-part epoxy. Stainless steel vessels are supplied with a satin finish.

Contact KTH Sales for sizing and other options available.  

Type R Design Bulletin

Other considerations for bag filtration chambers

The below information represents the multi-round chamber prior to 2007.  The chamber group was renamed and redesigned for better flow values.  The below is presented as informational data only.  Old Design bulletin -