 CK Series - Pumps for high corrosive chemicals designed with encapsulated driven impeller magnet, carbon filled Kynar® head / impeller and Viton® o-ring cover seal. Shaft and thrust washers are 99.5% pure alumina ceramic. Carbon filled Teflon impeller bushing design offers low friction and corrosion resistance and abrasive resistance for long life. Fluid temperature up to 200 F. Details for models 1/3 to 3/4 HP. |
TE-5.5-MD-CK – 1680 GPH @
16 feet – 3/4" threaded MNPT discharge, and 1" threaded FNPT intake ports.
Totally enclosed (TE) fan-cooled motor has thermal overload single phase. 1/3 HP
–Cat’l # 585600 (115/230V)  TE-6-MD-CK – 19200 GPH @ 16 feet – 3/4" threaded MNPT discharge, and 1" threaded FNPT intake ports. Totally enclosed (TE) fan-cooled motor has thermal overload single phase. 1/2 HP –Cat’l # 586600 (115/230V) TE-7-MD-CK – Totally enclosed (TE) fan-cooled motor has ball bearings. Thermally protected. ¾ HP – 2250 GPH @ 30 feet – 1" threaded MNPT discharge, and 1 ½" threaded FNPT intake ports. Cat’l # 587600 (115/230V) Single phase motor & Cat’l # 587603 (230/460V) Three phase motor. |
Motors for pumps - Motors for all units starting with the letters TE are standard with Totally Enclosed Fan Cooled (TE or TEFC). TE motors are recommended for applications when the fumes of the liquid could cause damage to the motor. Explosion Proof (EP) motors are available for the 3/4HP pump when required. |