 MD Series - Pumps for mild corrosive chemicals design with uncoated barium ferrite driven impeller magnet, glass filled polypro head / impeller and Nitrile o-ring cover seal. Most use titanium shaft and thrust washers. Fluid temperature up to 150 F. |
 |
Model 1-AA-MD - Polypro body
construction with 316SS shaft and Rulon washers. Open shaded-pole motor with sleeve
bearing. 1/200 HP - 100 GPH @ 3 feet - 1/2" tubing connections. Cat'l #
588001 (110V) & 588002 (230V) Model 1-EUAA-MD - Similar pump to above but has submersible motor - Compatible for salt or fresh water service. Cat'l # 588205 (110V) & 588211 (220-240V) |
| Model 1-MD - Polypro body construction with Titanium shaft and washers. Open fan cooled motor with sleeve bearing. 1/70 HP - 90 GPH @ 6 feet - 1/2" tubing connections. Cat'l # 589002 (110V) & 589012 (230V) |
 Model 2-MD - Polypro body
construction with Titanium shaft and washers. Open fan cooled motor with
sleeve bearing. 1/30 HP - 410 GPH @ 6 feet - 1/2" threaded connections.
Cat'l # 580002 (110V) & 580012 (230V)Model
3-MD - Polypro body construction with Titanium shaft and washers. Open
fan cooled motor with sleeve bearing. 1/20 HP - 490 GPH @ 6 feet - 1/2"
threaded connections. Cat'l # 581002 (110V) |
| Model 4-MD - Polypro body construction with Titanium shaft and washers. Open fan cooled motor with sleeve bearing. 1/12 HP - 600 GPH @ 6 feet - 1/2" threaded connections. Cat'l # 582002 (110V) & 582012 (230V) |
| Model 5-MD - Polypro body construction with Titanium shaft and washers. Open fan cooled motor with sleeve bearing. 1/8 HP - 800 GPH @ 6 feet - 1/2" threaded connections. Cat'l # 583002 (110V) & 583012 (230V) |