- B2 - polypropylene
- B2 - stainless steel
- B2A - polypro - battery powered
This pump is small in weight
and big in power. Able to pump liquids with specific gravity up to 1.8 and viscosity
up to 500 CPS.
B2 PP SL-39" - Polypropylene Pump
Applications: A light, easily handled unit for pumping liquids similar to water. Suitable for chemicals compatible with polypropylene, Hastelloy C, carbon and Teflon. Not suitable for flammables.
Operating data
- Rate for 25" model: 6 GPM max. - 15 foot max.
- Rate for 39" model: 11 GPM max. - 20 foot max.
- Temp. of medium: up to 140° F
- Viscosity: up to 500 CPS
- Specific Gravity to 1.8
- Tube diameter is 1" for 25"
- Tube diameter is 1.2" for 39"
- Weight: 5.5 lbs. - includes motor
Examples of liquids pumped are hydrochloric acid, caustic soda solution, sulfuric acid, formic acid, ammonium chloride, potassium hydroxide solution etc.
Electric motor is supplied. See below for motor specifications.
B2 SS SL-39" - Stainless Steel Pump
Applications: A light, easily handled unit for pumping liquids similar to water. Suitable for chemicals compatible with stainless steel and Teflon. Not suitable for flammables.
Operating data
- Rate: 18 GPM max. - 20 foot max.
- Temp. of medium: up to 212° F
- Viscosity: up to 500 CPS
- Specific Gravity to 1.8
- 39" tube length x 1.1" diameter
- Weight including motor - 7.7 lbs.
The seal-less pump tube is constructed of 316SS, shaft is supported with carbon and Teflon bushings. Electric motor is supplied. See below for motor specifications.
Motor: 120 volt, 60Hz, 230 watt, with overload protection, on/off switch, double insulation, splash-proof and radio-suppressed. Cord supplied with grounded plug - 9.8 foot length. Thermoplastic motor enclosure. Not suitable for hazardous duty. Intermitten duty of 10 minutes (however you can empty a 55 gallon drum well within this time limit in most cases).
Accessories:
- # 0201-200 Accessory Kit for polypro pump - wall bracket, 5 foot hose assembly, polypro control nozzle
- # 0204-689 - stainless steel nozzle
- # 0204-065 - poly foot strainer - 25" pump
- # 0204-539 - poly foot strainer - 39" pump
B2-A PP SL-25" - Battery Powered Polypropylene Pump
Applications: A light, easily handled unit for pumping liquids similar to water. A portable pump that can be used independently of an electrical supply source.
Operating data (with fully-charge battery pack)
- Rate: 2 GPM max. - 10 foot max.
- Quantity: *max. 100 gallons - between charges
- Temp. of medium: up to 140° F
- Viscosity: up to 380 CPS
- Battery charger is included
- 25" tube length x 1" diameter
- *All rating decreased for higher specific gravity solutions
Examples of liquids pumped: Hydrochloric acid, caustic soda solution, phosphoric acid, sulfuric acid, nitric acid, bleach etc.
Pump tube: Seal-less pump tube in polypropylene (PP), immersion depth 25", tube diameter 1".
Motor: 4.8 volt motor powered by rechargeable battery pack, with integrated push button acting as an on/off switch. Supplied with a battery charger. Not suitable for hazardous duty.
Weight (pump and motor) approx. 3.3lbs.
Bulletin for B2 Pump