Air and Electric

Lutz drum pump or mixers are are combined with the correct motor to form a unit.  Motor selection is a function of the environment that the unit will be used.   Open drip motors are often selected for closed top drum even when pumping corrosive chemicals.  TEFC and explosion proof motors are selected for more hazardous services.

• 120 volt, 800 watt, 60Hz. On/off switch with single-pole thermal over current release.
• Not suitable for hazardous duty.
• Operating data with MSL pump tubes:
• Quantity: up to 54 GPM
• Viscosity: up to 1500 CPS

• 120 volt, 640 watt, 60HZ. Optionally with or without speed controller. On/off switch with single-pole thermal over current release. Double insulated.
• Not suitable for hazardous duty.
• Operating data with MSL pump tube:
• Quantity: up to 54.5 GPM
• Viscosity: up to 1000 CPS

• 120 volt, 60Hz, power input 510 watt, on/off switch with single-pole thermal over current release,
• T.E.F.C. splash-proof in accordance with protection class IP 54, double insulation with protective ground connection.
• For very aggressive atmospheres an acid-proof motor is available.
• Operating data with MSL pump tubes:
• Quantity: up to 48 GPM
• Viscosity: up to 1000 CPS

• Same features as above with 700 watt (.93 HP)
• Recommended for solutions with greater that 1.4 Sp. Gr.

• 120 volt, 620 watt, 1/2 HP, 60Hz. U.L. Listed Class I, Groups C and D. Class II, Group F and G. Explosion-proof.  (Use MEII for 220V/50 Hz.)
• Low voltage shut-off.  Motor is supplied with 16-ft. power cable.  Explosion proof plug not included.  Remote operating kit available as an option.
• A light, easily handled explosion-proof motor  for almost all types of thin bodied, slightly viscous and flammable liquids.
• Operating data with MSL pump tubes:
• Quantity: up to 49 GPM
• Viscosity: up to 1100 CPS
• Examples of liquid pumped are acetone, petrol/gasoline, solvents, oils, acids, lyes, ammonium chloride, photographic developers etc.

Warning:  Stainless steel or Hastelloy C metal pump tubes and grounding kits must be used in explosion proof conditions.  Static electricity will build from the movement of the liquid and MUST BE GROUNDED !

Recommend for hazardous duty - includes grounding terminal.  Protection class in accordance with standard EN 50014.

Compressed-air driven motor with a power output of approx. 300 watt at 87 PSI operating pressure and a speed of 6900 RPM, air consumption approx. 17 CFM. With sound absorber and earth connection.

Performance with MSL pump tubes

• Quantity: up to 48 GPM
• Viscosity: up to 1200 CPS

Applications: Compressed air driven drum and container pumps for thin-bodied, neutral, aggressive and inflammable liquids. 

• MD-1 - without on-off valve -
• MD-2 with on-off valve and carrying handle

Not Recommend for hazardous duty

Compressed-air driven motor with a power output of approx. 220 watt at 87 PSI operating pressure and a speed of 6900 RPM, air consumption approx. 14 CFM.

Operating data with MSL pump tubes:

• Quantity: up to 42 GPM
• Viscosity: up to 1100 CPS