Plast-O-Matic Electric Actuated Ball Valves
1/2" through 2" - 2 way and
3 Way
Features:
- Rugged plastic construction for corrosive atmospheres.
- Direct manual override with visual position indication.
- Open, Closed, and Running lights.
- Thermally protected motor.
- IP-54/NEMA 4 water and dust tight enclosure.
- Easily attached to MBV Ball Valves.
- Simple connections for remote operation and position indication.
2 way materials: PVC, CPVC, polypro, PVDF
3 way materials :PVC and CPVC
Specifications:
- Enclosure 40% glass filled polyester - NEMA IV water and dust tight - for indoor or outdoor use.
- Housing is sealed with 18-8SS screws and Buna gaskets - 1/2" NPT conduit connection is standard.
- Manual override wheel moves actuator and valve
- Three indicator lights - red, green and yellow (moving valve)
- CSA approval on 120V unit
- 120VAC (standard), 24VAC, 220VAC or 240VAC
- 8 second cycle time - unidirectional - requires SPDT relay
- Two sizes of actuators
- For 1/2" - 1" EBV65 - 50% duty cycle (@ 70F standard)
- For 1 1/4" - 2" EBV105 - 20% duty cycle (@ 70F standard)
- Thermal overload protected - 120F max ambient with reduced duty cycle.
dimensions and specifications for 2 way actuators
dimension and specifications for 3 way actuators
instruction
book for electric actuator
Return to KTH Sales Home Page