Combines P Series vertical immersion pump with a filter chamber in an all plastic combination that allows the system to be mounted within the tank. The mounting in tank makes for simple installation without the typical need for external piping or drain fitting for the tank. Solution containment is assured. The chamber's filter is serviced without removal from the tank -- just remove the chamber's head and replace the filter. Suction extension piping for the pump is used to feed solution from near the bottom of the tank. Solution spargers or eductors may be added to the discharge of the chamber to increase solution agitation. These systems are available in all CPVC, polypropylene or PVDF. Chambers are available that hold from 1 - 10" tube to a multi tube chamber that holds three (3) 30" filters. Flow rates to 2150 GPH. See specification for complete details.
Shown on right - A-100B - all polypropylene
A-A System
Combines P Series vertical immersion pump with a filter chamber in an all plastic combination that allows the pump to be mounted within the tank and the chamber on the tank lip. The mounting on the tank lip makes for simple installation without the typical need for external piping or drain fitting for the tank. Suction extension piping for the pump is used to feed solution from near the bottom of the tank. Solution spargers or eductors may be added to the discharge of the chamber to increase solution agitation. The chamber's filter is serviced without removal from the tank -- just remove the chamber's head and replace the filter. These systems are available in CPVC, polypropylene or PVDF and include high temperature vinyl hose. Solid plumbing is available upon special request. Flow rates to 540 GPH. See specifications for details.
Shown on right - A-100AL
Series A Filter System Series A Filter System
In-Tank Pump / Outside Filter Chamber
Flows to 10,000 GPH
In-tank pump with out-of-tank filter chamber. No metal contact. Excellent for acid and alkaline solutions. CPVC, PVC, polypropylene or PVDF construction available.
Using P Series vertical immersion pump and C Series Chamber in combination. Systems are supplied with vinyl hose, clamps, control valves and set of wound filters. Chamber includes gauge with isolator and vent valve.
Series A-SF Suction Filter System
In-Tank Pump / Filtered Suction
Flows to 3,400 GPH
In-tank pump with inlet filter provides filtration or carbon treatment. The eductor on the discharge provides high agitation for the tank. No metal contact. Excellent for acid and alkaline solutions. CPVC with polypro eductor.
Using P Series vertical immersion pump and many types of filters. Dual filter units are available. Polypropylene eductor is supplied with system. Low in cost and dependable -- just mount on the tank lip and you are ready to go.
