| HSC Series 316 Stainless Steel Centrifugal Pump Flows to 140 GPM - Pressure to 140 feet Recommended for:
|
 |
Features:
|
Options
|
Series HSC are corrosive resistant all purpose 316L stainless steel pumps ideal for many O.E.M. and chemical processing applications including most acids and alkalies as well as solvents to 250o F. The high efficiency of this pump produces up to 90 feet of head. The HSC Series pump is widely used for transfer of non-flammable, non-abrasive fluids which are compatible with pump component materials including cleaners, caustic materials, salt solutions, chlorinated solvents, photographic chemicals and de-ionized water. Seals - Series HSC pumps are supplied with an EPR/mechanical seal. Optional seals include Viton®/carbon/ceramic and Viton® silicon carbon/silicon carbon. A double mechanical seal available in the same materials with water flush can also be supplied. - Series HSC pumps are supplied with an EPR/mechanical seal. Optional seals include Viton®/carbon/ceramic and Viton® silicon carbon/silicon carbon. A double mechanical seal available in the same materials with water flush can also be supplied. Motors - The pump is directly coupled to a 3450 RPM, ball bearing motor. All motors are totally enclosed fan cooled. Single phase and three phase motors. Wet ends are available for OEM supplied motors. - The pump is directly coupled to a 3450 RPM, ball bearing motor. All motors are totally enclosed fan cooled. Single phase and three phase motors. Wet ends are available for OEM supplied motors. Elastomers - Ethylenepropylene (EPR) is the standard elastomer for O-ring and seal components. Viton® is available as an option. Ethylenepropylene (EPR) is the standard elastomer for O-ring and seal components. Viton® is available as an option. Pedestal Mount - Pedestal mounting rather than close coupling is available. The pedestal bearing bracket, pump head and motor are mounted on a common polypropylene base. - Pedestal mounting rather than close coupling is available. The pedestal bearing bracket, pump head and motor are mounted on a common polypropylene base. Multi-Stage - For high pressures to 140 TDH, a multi-stage pump is available. - For high pressures to 140 TDH, a multi-stage pump is available. Bulletin (from Manufacturer) - Adobe PDF file |
 flow in GPM |
Select HP upon the expected maximum flow for your system. |
| Model | Max. GPM | Max. Head | Suction | Discharge | Horsepower | Voltage/phase |
| Single Stage - with single or double mechanical seal | ||||||
| HSC-1/4 | 23 | 40 | ¾" FNPT | ½" FNPT | 1 / 3 | 115/230/1 or 230/460/3 |
| HSC-1/2 | 29 | 52 | ¾" FNPT | ½" FNPT | 1 / 2 | 115/230/1 or 230/460/3 |
| HSC-3/4 | 64 | 46 | 1 ½" FNPT | 1" FNPT | 3 / 4 | 115/230/1 or 230/460/3 |
| HSC-1 | 87 | 70 | 1 ½" FNPT | 1" FNPT | 1 | 115/230/1 or 230/460/3 |
| HSC-2 | 110 | 75 | 1 ½" FNPT | 1" FNPT | 2 | 230/460/3 |
| HSC-3 | 132 | 85 | 2" FNPT | 1 ½" FNPT | 3 | 230/460/3 |
| Multi-Stage - with single mechanical seal | ||||||
| HCS-1 1/2M | 20 | 146 | ¾" FNPT | ½" FNPT | 1 1/2 | 115/230/1 or 230/460/3 |
| HCS-2M | 32 | 146 | ¾" FNPT | ½" FNPT | 2 | 230/460/3 |
| HCS-3M | 40 | 146 | ¾" FNPT | ½" FNPT | 3 | 230/460/3 |
| Nomenclature | ||||
| HSC | 1 / 2 | D | E | - P |
| Horizontal Stainless Centrifugal | Size of pump – see above | D = double seal S = single seal M = single seal -multi stage |
E = EPR elastomer V = Viton® VSC = Viton® with silicon carbide seal |
(blank) close coupled to
motor (std.) P = pedestal mounted |
Viton® is a registered trademark of DuPont Dow Elastomers.