Penguin M Series
  • Polypropylene Magnetic Drive Pump
  • Sealless
  • Flows to 200 GPM
  • Pressures to 150 Ft. TDH

Features:

  • No Metal Contact
  • Chemical Resistant
  • Leakproof
  • Available in
    • polypropylene / Ryton
    • PVDF (Kynar)
    • 316 SS
    • Hastelloy

Recommended for:

  • Transferring
  • Mixing
  • Filtering
  • Recirculation
 M-Pump-Small.jpg (6744 bytes)

M-SP-series.jpg (26983 bytes)

SP-M-3/4 with self-priming chamber
Penguin magnetic driven pumps are corrosion resistant to a wide range of chemical solutions including acids, alkalies and caustics up to 180 degree F. There is no shaft seal, so there is no seal wear, leaking or squeal. There is no seal friction to cause loss of pumping power. The only moving parts inside the pump volute are the impeller magnet assembly and the bushing which rotates on the pure ceramic spindle. Powerful impeller and drive magnets provide full torque, prevent slippage and give instant start-up.   Carbon impeller bushing can be provided as an option -- this allows the pump to run dry with out damage for short periods of time.

Materials of construction
Penguin magnetic driven pumps are constructed of polypropylene and/or Ryton (motor bracket, impeller magnet assembly, encapsulated impeller assembly and pump housing), carbon or chemloy or Ryton/Teflon (bushing), ceramic (spindle and thrust washers) and Viton® O-ring. PVDF (Kynar) and stainless steel construction are available for most sizes.

Motors
All motors (1/5 HP and larger) are TEFC - totally enclosed fan cooled.  M1/14 and   M1/8 are blast cooled enclosure. Chemical Duty, air drive, explosion proof optional motors are available for most sizes.

Self Priming
Model M-3/4 can be supplied as a self priming unit using a 1HP motor. Also as an option, Penguin priming chambers can be supplied to other M series pumps to fMF-Syst.jpg (7444 bytes)acilitate priming the pump and reduce the danger of running the pump dry. Mounted on a common polypropylene base, the priming chamber is piped directly to the suction of the pump with a low valve on the pump discharge. Casters can be added for portability. 316 SS and Kynar construction are available on most models.

Parts and Installation Sheet - Adobe PDF file

Filtration Systems
Penguin Series SM and MF Filter Systems combine the M Series pump with filter systems.   Take me there.
M Series - Dimension and Motor Information
Model Suction Discharge Horse Power  
M-1/14 ¾" FNPT ½" MNPT 1/15 115V only
M-1/8 1" FNPT ½" MNPT 1/10 115V only
M-1/4 1" FNPT ½" MNPT 1/5 115 or 230V
M-1/3 1" FNPT ¾" MNPT 1/3 1 or 3 phase
M-1/2 1" FNPT ¾" MNPT ½ 1 or 3 phase
M-3/4 1 ½" FNPT 1" MNPT ¾ 1 or 3 phase
SP-M-3/4 1 ½" MNPT 1" MNPT 1 1 or 3 phase
M-2 2" MNPT 1 ½" MNPT 2 3 phase
M-3 2" MNPT 1 ½" MNPT 3 3 phase
M-10 3" MNPT 2" MNPT 10 3 phase

 

M Series - Performance Data
Model Flow @ 10 Feet Flow @ 20 Feet Flow @ 30 Feet Max: GPM @ Feet
M-1/14 5 - - 7 @ 5 feet
M-1/8 11 5 - 11 @ 5 feet
M-1/4 16 11 3 17 @ 5 feet
M-1/3 23 17 11 25 @ 5 feet
M Series - Performance Data
Model Flow @ 25 Feet Flow @ 40 Feet Flow @ 50 Feet Max: GPM @ Feet
M-1/2 26 15 - 34 @ 10 feet
M-3/4 45 35 27 50 @ 12 feet
SP-M-3/4 45 35 27 50 @ 12 feet
M Series - Performance Data
Model Flow @ 45 Feet Flow @ 80 Feet Flow @ 140 Feet Max: GPM @ Feet
M-2 75 28 - 80 @ 35 feet
M-3 112 64 - 125 @ 35 feet
M-10 200 173 70 205 @ 40 feet

Detailed performance curves indication BHP and performance with trimmed impeller are available upon request.

Viton® is a registered trademark of DuPont Dow Elastomers.