Penguin P Series Vertical Immersion Pump - Index

Proven service design for over 30 years

Now with extended length and larger flows to 350+ GPM

P Series vertical immersible pumps are compact, portable and self-priming when immersed within a tank. Simple in design and efficient in performance, this pump has only one moving part; the impeller. This pump is suitable for pumping, agitating, filtering or circulating acid and alkaline solutions, abrasive fluids, electroless plating solutions and other corrosive solutions. The pump has a rigid, solid stainless steel that extends from the motor fan to the impeller. The shaft sleeve of the impeller eliminates contact of solution with any metal parts. The impeller's top vanes perform the function of the seal allowing for no pump bearing, no bushings, no wearing parts, and open clearances within the pump. This produces little or no maintenance required for the pump. The pump is mounted with a extension flange or baseplate that allows for mounting on the tank lip; pump can be mounted directly in the tank or on the outside of the tank if space is limited.  Exception - extended length pumps must be mounted in the tank.

This design has been providing reliable service for the most difficult applications for more than twenty years. Materials of construction include CPVC (standard), polypropylene, and PVDF.

The materials are often combined to allow for special application such as electroless nickel plating. In this case, a CPVC pump is modified (‘EN’ version) with a PVDF impeller to gain the addition thermal and corrosion strength of the PVDF material without the large price increase required for a total PVDF constructed pump.P-cut.jpg (12023 bytes)

Design Features

A.  Epoxy painted motor with drip covers
B.  TEFC motor standard – air and XP
C.  Air purge / vent assembly – P1/4 – P 15
D.  One-piece rotor shaft assembly
E.  Viton lip / fume barrier assembly
F.  316SS shaft standard – Titanium optional
G.  One piece impeller – Bearing free
A new "K" design now prevents impeller unthreading during reverse rotation of a three phase motor .  Available for P-1 through P-2 and "HP" pumps.  Details

 

(click on below title or image for additional details) 


Classic design - 1/15 HP to 7 1/2 HP - flows to 150 GPM

  • Seal-less vertical immersion design
  • No bushing or bearing design - dry run capacity
  • CPVC, polypropylene and PVDF  (Kynar)
  • Heavy duty service 
  • No solution contact with metals
  • Stainless or Titanium shafts (over 1/2 HP)
  • TEFC motors with air purge (over 1/3 HP)
  • Portable, compact, self-priming when immersed
  • Mount inside or outside of tank
  • Plating tanks, cleaner tanks, sump pumping
  • Prices start at $ 324.00

A new "K" design now prevents impeller unthreading during reverse rotation of a three phase motor .  Available for P-1 through P-2 and "HP" pumps.  Details


High Flow design - 7 1/2 HP to 15 HP - flows to 350 GPM

  • Seal-less vertical immersion design
  • CPVC construction
  • Heavy duty service
  • No bushing or bearing design - dry run capacity
  • TEFC motors with air purge
  • No solution contact with metals
  • PVC or CPVC base plate incorporated discharge piping
  • 3" discharge piping for low frictional loss
  • 15 5/8" suction to plate dimension
  • 17" x 24.25" cover plate

Extended Length Classic design - 3 HP to 5 HP - flows to 150 GPM

  • Seal-less vertical immersion design
  • PTFE wear ring in head - easy to service
  • CPVC construction with optional PVDF impeller
  • Heavy duty service 
  • No solution contact with metals
  • Solid Stainless Steel shafts 
  • TEFC motors with air purge 
  • Portable, compact, self-priming when immersed
  • CPVC base plate incorporated discharge piping
  • 1 1/2" discharge piping 
  • 21" suction to plate dimension
  • 17" x 24.25" cover plate
  • In tank only

Extended Length High Flow design - 7 1/2 HP to 15 HP - flows to 350 GPM

  • Seal-less vertical immersion design
  • CPVC construction
  • Heavy duty service
  • TEFC motors with air purge
  • No solution contact with metals
  • PVC or CPVC base plate incorporated discharge piping
  • 3" discharge piping for low frictional loss
  • 21 5/8" suction to plate dimension
  • In tank only



Click on image for links to pump bulletins

Similar pump in stainless or titanium

Return to Penguin Pump Index

Return to KTH Sales Home Page   

Please feel free to contact us for additional application information - sales@KTHSales.com